-
-
-
Tổng tiền thanh toán:
-
Danh mục sản phẩm
Đầy đủ fader, các núm chức năng, drum pad và vân vân, lại kết hợp được với đa số các phần mềm làm nhạc hiện nay (một số thì tự động mapping số còn loại bạn phải setup tay với DAW), bạn có thể điều khiển cuộc chơi trong studio theo cách riêng của bạn!
2 Transpose chức năng quan trọng trong đàn cho nốt # hoặc giáng
8 phím gõ trống cảm ứng lực siêu nhạy
9 núm vặn 30 mm điều chỉnh các hiệu ứng 1 trong đó sử dụng cho tổng volume master (có thể tự cấu hình)
1 màng hình hiển thị số trên đàn
1 đầu ra MIDI cho phép giao tiếp với các thiết bị khác
6 nút vận chuyển chuyên dụng luôn nằm trong tầm với và được ánh xạ để điều khiển Chu kỳ, Tua lại, Chuyển tiếp, Dừng, Phát và Ghi. Nhấn Shift để có quyền truy cập vào các chức năng thay thế như Goto L, Set L, Set R, Hoàn tác, Nhấp và Chế độ. Các nút lên / xuống theo dõi chuyên dụng và các nút Patch lên / xuống được đặt bên dưới màn hình.
Tích hợp Impact LX88 + DAW hiện hỗ trợ Cubase, Digital Performanceer, FL Studio, Garageband, Logic, Nuendo, Reaper, Reason, Sonar và Studio On, các nút và điều khiển được dán nhãn để bạn không phải nhớ cách chúng được gán. Đó là lý do tại sao Impact LX + dễ sử dụng và có đủ các tính năng bổ sung
Ứng Dụng Sản Phẩm
Ứng dụng sản phẩm Đàn midi được dùng sản xuất âm nhạc hoặc trình diễn, ngoài ra bạn có thể kết hợp với bộ tiếng piano, guitar, string, trống,... trong máy tính/laptop để có thể luyện tập.
yêu cầu hệ điều hành
Phần mềm tặng Kèm
Hoạt động với những phần mềm
Kích thướt
Sản Phẩm bao gồm
The 88-key Impact MIDI Controller
The 88 note velocity sensitive keyboard is a semi-weighted action with medium tension. Carefully balanced with an even and dynamic response , the Impact LX88+ offers 4 velocity curves that gradually increase in dynamics so there is a match for any playing style. If you don’t need velocity, 3 fixed velocity levels cater for a consistent output. The full-size, piano-style keys are covered to protect against dirt and dust while also complementing the Impact LX88+ design. Transpose buttons as well as pitch bend and modulation wheels are within reach, so you can quickly shift the keyboard up or down as needed, or apply additional articulation with the wheels.
The Impact LX88+ keyboard can send on up to 3 zones at the same time. Press Layer to add the layer zone and split to add the split zone. When split or layer is active, the corresponding LED button is lit so there is no confusion. Each zone can be programmed to send on it’s own unique MIDI channel with essential settings either pre-programmed or adjustable during performance.
This is where the 2 Transpose buttons below the Split and Layer buttons come in. Four functions are selectable on the fly so you can make important changes at any time, even while you play. A key combination makes assignment quick and easy with the LED display telling you which function you have selected. Choices include sending out MIDI Program Messages, change the Global MIDI Channel or select any of Impact LX88+’s 5 user presets with either the Octave or Transpose buttons. Pressing either split or layer while pressing the Transpose buttons will change the setting currently assigned for the corresponding zone. Neat!
Nine 30mm faders, 9 MIDI buttons and 8 encoders are at the center of Impact LX88+’s control panel. Each control is fully programmable to send any MIDI CC message for use with hardware or software MIDI products. Used with Nektar DAW integration, the controls take on a life of their own, providing flexible pre-mapped DAW control giving you the best of both worlds. Control settings can be stored in any of the 5 Impact LX88+ presets for recall at any time. And if you switch Null on, any parameter values are stored when you change presets so you avoid parameter jumping.
The 9 LED buttons can be programmed with a variety of MIDI messages including sending specific MIDI Program changes. The last MIDI Program message sent is remembered so a corresponding LED button illuminates correctly, even if Program was sent via, for example, the transpose buttons or the Setup menu. You can also assign the 8 pads to send Program messages so you’ll have instant access to 17 buttons without changing preset or pad map.
Used with Nektar DAW Integration the LED buttons indicate status for a number of parameters. In Instrument mode, an instrument plugin’s switch parameters can be learned with the LED telling you when it’s on or off. In Mixer mode the LED buttons control Mute and Solo, with the LED colors indicating the corresponding channels current status.
For groove and beat creation, Impact LX88+’s 8 velocity sensitive pads make life easy. Calibrated to trigger at a light touch, finger drumming is suddenly well within reach with a nice and even velocity response. Each pad can be assigned any MIDI note number or MIDI cc message for use as MIDI trigger or toggle buttons. But the best part is the “Pad Learn“ feature, which allows you to just select a pad, play the note or drum sound you want on the keyboard and assignment is done. No complex menus for a task that’s essential to getting the most out of your pads. Assignments are stored over power cycling so you don’t lose your settings when you switch your system off for the night. In addition, 4 pad map locations can store your settings for future recall.
The 4 color LED illumination not only looks good but also indicate which pad map is currently loaded and can even tell you which type of MIDI message each pad sends. With Nektar DAW Integration, the pads are automatically mapped in for example Reason and Bitwig.. The two Clips and Scenes buttons are used in Bitwig to trigger…., Clips and Scenes. In Reason, a clever control of Reason’s location points create a similar experience with scenes triggering of any Reason song.
Impact LX88+ software integration supports most of the popular DAWs. A common workflow gives access to many of the functions you are most likely to need when recording and performing with your Impact LX88+. The best part is that it’s all done for you: Simply complete the installation process and start making music! Impact LX88+ DAW integration currently supports Cubase, Digital Performer, FL Studio, Garageband, Logic, Nuendo, Reaper, Reason, Sonar and Studio One. Buttons and controls are labeled so you don’t have to remember how they are assigned. That’s why Impact LX88+ is a breeze to use but with enough extra features under the hood to challenge even the most experienced power user.
The 6 dedicated transport buttons are always within reach and mapped to control Cycle, Rewind, Forward, Stop, Play and Record. Press Shift to get access to alternate functions such as Goto L, Set L, Set R, Undo, Click and Mode. Dedicated Track up/down and Patch up/down buttons are located below the display.
Press mixer and the first 8 Impact LX+ faders are assigned to control 8 channels of your DAWs mixer. The alternate Bank up/down function moves control assignments to the next or previous group of 8 channels. The 9th fader is assigned to the currently selected channel so you always know where to find it.
The buttons under the faders follow the channel assignment of their corresponding fader and can control Mute or Solo. Pan for the group of 8 channels controlled by the faders is handled by the 8 pots. Fader 9 is used for control volume of the current mixer channel as well as master volume.
To help you get the best out of your screen real estate, Impact LX also has shortcuts for opening and closing your DAWs mixer window so you can see what’s going on.
The Instrument button assigns all controls to instrument parameters once an instrument track is selected in your DAW. Nektar mapping ensures this is done automatically, so you can start tweaking immediately. Better still, many devices and plugins are pre-mapped to match the blue control labels on the Impact LX+.
The Page Button
With Nektar DAW Integration, a page button allows you to switch between Default settings and User settings with LEDs clearly indicating which page is active. Each page changes assignments of the 8 pots, leaving the User page for example for your own assignments. Many pre-mapped plugins take advantage of the two pages*. So you could use it for immediate access to both, oscillator 1 and oscillator 2 parameters from the pots, switching between oscillators using the Page button.
In addition, a typical control layout places amp and filter ADSR envelopes on the faders for instant access regardless of whether the Default or User page is selected.
“Grab” and Nektar Maps
The Nektar “Grab” mode allow you to temporarily assign parameters to controls as you work on your project. It’s as easy as holding down shift while moving the parameters on the instrument you want to control followed by moving the controls on Impact LX+ you want them assigned to. Some DAWs even supports saving “grabbed” parameters to a Nektar map* which means you can completely customize your assignments for future use.
* Implementation depends on the DAW. Check how Impact LX+ works with your DAW in the section below.
If you mainly want to use your DAW’s MIDI learn features, Impact LX88+ is easy to come to grips with.
There are 2 non-overlapping, read-only presets on the Mixer and Instrument buttons so you can quickly switch between independent and unique setups. These presets are also used for Impact LX88+’s integrated DAW support.
In addition, 5 user presets are programmed for GM compatible and “learn-friendly” setups plus they can of course be overwritten with your own settings. You for example could set up Impact LX88+ for use with Pro Tools or Ableton Live, both of which have limited integration options. Using Impact LX8+”s generic MIDI controller capabilities, setups can get you quite far.
With the Impact LX88+’s “Null” function switched to on, parameter values are stored when you switch between presets so you avoid parameter jumping.
On the back of Impact LX88+ are the connection points including:
As a low powered USB device, Impact LX88+ works with all USB devices that feature a Class compliant MIDI driver. This includes all version of Windows from XP and higher, Apple OS X 10.5 and higher plus Linux (as long as a USB MIDI driver package is installed).
And if you are often on the move you can easily hook your Impact LX88+ keyboard to an Apple iPad using the iPad’s optional USB camera connection kit (optional). Of course the Impact LX is powered by the iPad so you can work away for as long as your iPad remains charged.
Bitwig 8-Track is included with every Impact LX+ so you can start producing, performing, and designing sounds like a pro from day one. Bitwig 8-Track gives you access to over 50 software instruments and effects for use on up to 8 audio or MIDI project tracks, and you can use any 3rd party VST plug-ins you might own, too. The ‘Bitwig Essentials Package’, a highly versatile handpicked selection of loops, clips and samples, is also included to help you get started. So put all that together and you have a powerful sketchpad for your musical ideas featuring the acclaimed workflow of Bitwig Studio.
Nektar DAW Integration supports Bitwig 8-Track, so using Nektar Impact LX+ and Bitwig 8-Track together is a fantastic combination. If you are just starting out, you will find it’s the perfect way to take your first steps in the world of digital music creation. And if you’re already familiar with using computer software, then you’ll be amazed at what this combination has to offer!
Keyboard
88 note, velocity-sensitive semi-weighted keyboard
4 velocity curves + 3 fixed
Pitch bend & Modulation wheels
Transpose shift buttons
Controls
8 potentiometers
9 30mm faders
9 assignable buttons
6 dedicated transport buttons
5 preset locations store control settings
Page button (for Nektar DAW Integration only)
Nektar DAW Integration for major DAWs
Pads
8 velocity sensitive pads
Each pad LED illuminated with 4 color options: Green, Yellow, Orange and Red
4 velocity curves plus 3 fixed
Note-learn
Pads assignable notes and MIDI cc messages
Load or Save to any of 4 pad maps
Clips and Scenes LED buttons
Connections
1/4” TS jack foot switch input (MIDI Assignable)
MIDI Out (can be routed from LX88+ or from DAW)
USB port on rear panel, and USB bus powered
Connects to iPad via Apple Camera Connection Kit (not supplied)
Power supply socket (PSU optional) 9v 600mA, center positive, 2.1mm barrel connector
Weight & Dimensions
Dimensions: 50 1/4″(L) x 11″(D) 3.5 “(H)
Weight: 18 Lbs
System Requirements
USB Class compliant, no driver is needed for:
Apple iOS, Apple OSX, Windows XP, or higher, Linux (MIDI driver software required)
Nektar DAW Integration
Mac OS X 10.7 or higher, Windows Vista, 7 & 8 or higher
By @nyaudio
Để tiện lợi trong việc mua hàng, chúng tôi khuyến khích quý khách đặt hàng online đơn giản và tiện lợi. Sau khi đặt hàng chúng tôi sẽ chủ động liên hệ tư vấn về sản phẩm và Chính sách vận chuyển.
1. Chọn Sản Phẩm
Khách hàng lựa chọn sản phẩm cần đặt. Bấm vào nút "CHO VÀO GIỎ HÀNG"
2. Xác Nhận
Sản phẩm đã lựa chọn sẽ được cho vào ngay giỏ hàng. Tại đây, khách hàng có thể tiếp tục đặt mua thêm sản phẩm khác hoặc thêm số lượng cho sản phẩm vừa chọn! Nếu không lựa chọn thêm sản phẩm nào nữa, vui lòng bấm vào nút "THANH TOÁN"
3. Hoàn Thành Đơn Hàng
Tại đây, Khách hàng chỉ cần điền tên, số điện thoại liên hệ, và địa chỉ nhận hàng,các hình thức thanh toán có thể thanh toán Online,chuyển khoản hoặc COD click vào phương thức bạn muốn thanh toán,sau đó đặt hàng hoàn thành nhân viên của chúng tôi sẽ gọi điện lại cho khách hàng, tư vấn - xác nhận và gửi hàng,Thời gian nhận hàng từ 1 đến 3 ngày tùy địa phương.
